Crane
long range on the roof
The sunbrush Crane has been specially developed for the professional cleaning of rooftop installations and hard-to-reach PV surfaces. The cleaning system is mounted on a crane or telescopic handler and allows the brush to reach areas where cleaning from the ground is virtually impossible. A long reach, flexible brush options and quick changeover times make the Crane a versatile solution for challenging roof surfaces.
Features & benefits of the crane
- Quick and easy to assemble
- Optimised for use on telescopic handlers and cranes
- Easy to operate
- Precise control of the brush and boom
- Specially designed for roof cleaning
- 180° swivelling brush booms
- Brush width up to 4.5 metres
Technical specifications
- Brush drive: double-acting oil circuit, approx. 30–40 l/min, max. 180 bar
- Brush swivel: double-acting oil circuit, approx. 10 l/min, max. 180 bar
- Water pump: hydraulic circuit with max. 180 bar, 10 l/min
- Water pipe: internal diameter min. 18 mm, max. 8 bar
- Water temperature: up to 50 °C
- Power supply: 24 V continuous current
- Control: via the crane remote control
- Swivel range: 180°
All the key information in a concise format for you to refer to.
Features for roof cleaning
Long reach
The combination of the crane arm and cleaning system allows access to solar panels located at a considerable distance. The brush extends the working range by a further six metres, making even hard-to-reach roof areas accessible.
Compact transport console
The components required for the water supply during cleaning are compactly housed in a transport console.
Simple control
All functions of the Crane are operated via the existing crane remote control. The control system is programmed by the crane manufacturer.
180° cleaning
The cleaning motor can be swivelled hydraulically through 180°. This allows rows of modules to be cleaned on both the left and right sides of the carrier vehicle.
Short set-up times
The Crane can be fitted quickly and easily.
Brushes to suit the roof surface
Different brush lengths are available depending on the size and layout of the surface to be cleaned. The brushes are easy to replace and can therefore be adapted to different applications.
The brushes have a diameter of 350 mm. Their high-quality, certified bristles are UV-resistant and specially designed for the gentle yet thorough cleaning of solar panels.
Reaching high, flexible cleaning
Large roof areas, tall buildings and modules situated far from the roof edge place particular demands on professional PV cleaning. The Crane from sunbrush utilises the reach of the existing crane arm and extends it further with the cleaning system. This allows even more distant module surfaces to be reached and cleaned. At the same time, the Crane can be combined with various crane vehicles, thereby opening up additional applications for existing vehicle technology.
Is cleaning worth it?
Dirty modules can affect the cost-effectiveness of a PV system. The sunbrush ROI calculator allows you to check what financial impact professional cleaning could have on your own system.
Is the Crane suitable for my application?
Building height, reach, roof area and existing crane technology determine what the right cleaning solution looks like. Together, we’ll work out how the Crane can be configured to meet your requirements and integrated into your crane vehicle.

Oliver Köster
Sales International
sales@sunbrushmobil.com+49 8332 243 43 90
Get a personal consultation